temporary window protection liquid

temporary window protection liquid

1 - Crawl to Surface with Roll or Brush

Apply water based peelable coating to a surface with a standard 5mm wool roll used for normal water-based paints or with a broad but thin bristle brush. The wet film thickness is at least 200 microns. If protection is needed for severe conditions, 30-45 min. then apply one more coat. In applications with airless gun, apply with a 200 bar machine using 517 or 519 nozzles. Provide homogeneity on the surface by making a hand vertical after a horizontal hand when applying.

2 - Wait to dry up

Drying is between 5 min and 120 min depending on the outside temperature (16-30 degrees). At lower temperatures, the drying time may increase as the product is water-based.

3 - Remove from the Corner

If you no longer need the Peelable Surface Protection System, you can peel easily by removing it from the formed film edge, or it can be removed from the surface with a pressurized water gun if desired.