ROLLER APPLICATION

ROLLER APPLICATION

• Using a sheep wool roller - apply 2 layers, allowing the first one to dry completely. 

Apply generously, to obtain a minimum WFT of 150 microns (WFT) (50 micron DFT);

• In the case of roller application, up to 10% of water can be added from total weight of the material; two layers can be applied complete drying of each layer in turn;

• The temperature of the material during application should be 20-30 ° C;

• Work at the temperature not lower than 10 ° C and humidity not higher than 85%;

• The roller should be dry and long-haired, preferably sheep's wool;

• The surface should be clean, degreased and free of contamination;

 • Apply one coat, waiting for the coat to dry completely;

• Then apply a second layer;

• At the end of work, clean the roller with water and allow clean tools to dry.